footer-top
Code Axi Heat Soak

Axi Heat Soaked glass is an appealing option when an ultra-durable glass type is called for. This is common in today's building industry.

Heat soaking treatment is undertaken by subjecting toughened glass to an extensive alternative heating process. The heat soaking treatment reduces the risk of breakages by up to 95% as a result of including Nickel Sulphide in the process.

Specifications

Minimum Panel Size:
300mm x 150mm

Maximum Panel Size:
5500mm x 2800mm

Thickness available:
4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 19mm

Axi Heat Soak cannot be cut or edgework processed after manufacture.

Tolerances of Toughened glass are set out in AS/NZS 2208.

Notes

All monolithic toughened glass and heat strengthened glass (with a surface compression greater than 52MPa) is required to be heat soaked and marked in accordance with European Standard EN14179-1 unless exempt under AS1288-2006 clause 3.8.

It is a responsibility of the Customer to identify individual requirements and to advise Axiom in writing if glass to be supplied is required to be heat soaked.